Heavy Duty Adjustable Trailer Stake Pocket D Ring Zinc Coated w/ 1/2" Hitch Pin, Load limit 5400 lbs & 4 Adjustable Holes | Stake Pocket D-Ring Tie Down Utility for Flatbed Trucks and Trailer – 8 Pack

<p>Pack size:&nbsp;8 Pack</p> <ul> <li>STRONG:&nbsp;Our stake pocket D-Rings are forged steel with a zinc coated finish. Each stake pocket D-ring has a working load limit of 5400 lbs. Capacity is 16,200 lbs. Do not exceed Working Load Limit.</li> </ul> <ul> <li>PRECISE PLACEMENT:&nbsp;Provides a D-ring exactly where you need it on your trailer.&nbsp;Each stake pocket D-Ring comes with a ½” hitch pin w/ locking cotter pin and 4 pin holes, so you can adjust the height of your Stake pocket D-ring to fit your current load.</li> </ul> <ul> <li>FITS MOST STAKE POCKETS:&nbsp;Not all stake pockets are identical. Designed to be compatible with standard 2” x 4” stake pockets. This includes common flush and outside stake pockets. Please be sure to measure before you purchase.&nbsp;</li> </ul> <p>DIMENSIONS:</p> <ul> <li>5.5” Tall from the bottom of mounting plate to the bottom of the anchor.</li> <li>3-3/8” Wide.</li> <li>5” from bottom of the mounting plate to the top of the 4th pin hole.</li> <li>4.25” from bottom of the mounting plate to the top of the 3rd pin hole.</li> <li>3.5” from the bottom of the mounting plate to the top of the 2nd pin hole.</li> <li>2.75” from the bottom of the mounting plate to the top of the 1st pin hole.</li> <li>Bent pin is 6-3/4" long and the clip is 3" long that goes inside it.</li> </ul> <ul> <li>RESILIENT:&nbsp;Our stake pocket D-Rings are zinc coated to resist scratches, dings, and rust.</li> </ul> <ul> <li>VERSATILE:&nbsp;D-Rings can be utilized as anchor points for a wide variety of hooks and end-fittings. D-Rings can be used to anchor grab hooks, j-hooks, S-hooks, shackles, and even tow hooks fit onto the ends of ratchet straps, winch straps, or chain binders.</li> </ul> <ul> <li>EASY-TO-USE:&nbsp;Slide the Stake Pocket D-Ring right into the stake pocket and use the ½” hitch pin to insert into the hole for your desired height and lock it into place using the cotter pin.</li> </ul> <p>.</p>